Vauxhall Combo (E) 2018> 1.2 PureTech 107bhp remap figures
The Vauxhall Combo (E) 1.2 PureTech 107bhp (2018>) is a petrol 1.2L model making 107bhp and 250Nm as standard. After a Stage 1 ECU remap we expect 145bhp and 283Nm - up to 38bhp and 33Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 107 bhp | 145 bhp | +38 bhp |
| Torque | 250 Nm | 283 Nm | +33 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 107 bhp | 250 Nm | |
| Stage 1Maximum software-only performance | 145 bhp | 283 Nm | +38 bhp +33 Nm |
| Stage 1 EcoPerformance with economy in mind | 136 bhp | 280 Nm | +29 bhp +30 Nm |
| Eco mapEconomy first | 132 bhp | 279 Nm | +25 bhp +29 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Combo (E)
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
This car is listed with a Valeo VD56 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Vauxhall Combo (E) 1.2 PureTech 107bhp?
We expect 145bhp and 283Nm against 107bhp and 250Nm as standard: up to +38bhp and +33Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Vauxhall Combo (E) 1.2 PureTech 107bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 136bhp and 280Nm expected. The Eco map is economy first: 132bhp and 279Nm. Both still sit above the standard 107bhp and 250Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Vauxhall Combo (E) figures
Other petrol variants
All petrol Combo (E) variants · Combo (E) 2018> overview · All Vauxhall figures