Vauxhall Combo 2000-2007 1.3 CDTi 69bhp remap figures
Thinking of remapping a Vauxhall Combo 1.3 CDTi 69bhp? The standard car makes 69bhp and 170Nm; with a Stage 1 remap from our Leicester workshop we expect around 99bhp and 206Nm, up to +30bhp and +36Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 69 bhp | 99 bhp | +30 bhp |
| Torque | 170 Nm | 206 Nm | +36 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 69 bhp | 170 Nm | |
| Stage 1Maximum software-only performance | 99 bhp | 206 Nm | +30 bhp +36 Nm |
| Stage 1 EcoPerformance with economy in mind | 92 bhp | 203 Nm | +23 bhp +33 Nm |
| Eco mapEconomy first | 89 bhp | 201 Nm | +20 bhp +31 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Combo
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Marelli MJD engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Vauxhall Combo 1.3 CDTi 69bhp?
We expect 99bhp and 206Nm against 69bhp and 170Nm as standard: up to +30bhp and +36Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Vauxhall Combo 1.3 CDTi 69bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 92bhp and 203Nm expected. The Eco map is economy first: 89bhp and 201Nm. Both still sit above the standard 69bhp and 170Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Vauxhall Combo figures
Other diesel variants
All diesel Combo variants · Combo 2000-2007 overview · All Vauxhall figures