Toyota Yaris 2006-2011 1.0 VVT-i 68bhp remap figures
The Toyota Yaris 1.0 VVT-i 68bhp (2006-2011) is a petrol 1.0L model making 68bhp and 94Nm as standard. After a Stage 1 ECU remap we expect 77bhp and 105Nm - up to 9bhp and 11Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 68 bhp | 77 bhp | +9 bhp |
| Torque | 94 Nm | 105 Nm | +11 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 68 bhp | 94 Nm | |
| Stage 1Maximum software-only performance | 77 bhp | 105 Nm | +9 bhp +11 Nm |
| Stage 1 EcoPerformance with economy in mind | 75 bhp | 104 Nm | +7 bhp +10 Nm |
| Eco mapEconomy first | 74 bhp | 104 Nm | +6 bhp +10 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Yaris
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch ME7.9.5 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Toyota Yaris 1.0 VVT-i 68bhp?
We expect 77bhp and 105Nm against 68bhp and 94Nm as standard: up to +9bhp and +11Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Toyota Yaris 1.0 VVT-i 68bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 75bhp and 104Nm expected. The Eco map is economy first: 74bhp and 104Nm. Both still sit above the standard 68bhp and 94Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Toyota Yaris figures
Other petrol variants
All petrol Yaris variants · Yaris 2006-2011 overview · All Toyota figures