Toyota Land Cruiser 2007> 4.5 V8 D4D 268bhp remap figures
The Toyota Land Cruiser 4.5 V8 D4D 268bhp (2007>) is a diesel 4.5L model making 268bhp and 649Nm as standard. After a Stage 1 ECU remap we expect 345bhp and 764Nm - up to 77bhp and 115Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 268 bhp | 345 bhp | +77 bhp |
| Torque | 649 Nm | 764 Nm | +115 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 268 bhp | 649 Nm | |
| Stage 1Maximum software-only performance | 345 bhp | 764 Nm | +77 bhp +115 Nm |
| Stage 1 EcoPerformance with economy in mind | 326 bhp | 755 Nm | +58 bhp +106 Nm |
| Eco mapEconomy first | 320 bhp | 749 Nm | +52 bhp +100 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Land Cruiser
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Denso unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Toyota Land Cruiser 4.5 V8 D4D 268bhp?
We expect 345bhp and 764Nm against 268bhp and 649Nm as standard: up to +77bhp and +115Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Toyota Land Cruiser 4.5 V8 D4D 268bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 326bhp and 755Nm expected. The Eco map is economy first: 320bhp and 749Nm. Both still sit above the standard 268bhp and 649Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Toyota Land Cruiser figures
Other diesel variants
All diesel Land Cruiser variants · Land Cruiser 2007> overview · All Toyota figures