Smart Crossblade 2002-2003 0.6 Turbo 70bhp remap figures
The Smart Crossblade 0.6 Turbo 70bhp (2002-2003) is a petrol 0.6L model making 70bhp and 109Nm as standard. After a Stage 1 ECU remap we expect 85bhp and 127Nm - up to 15bhp and 18Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 70 bhp | 85 bhp | +15 bhp |
| Torque | 109 Nm | 127 Nm | +18 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 70 bhp | 109 Nm | |
| Stage 1Maximum software-only performance | 85 bhp | 127 Nm | +15 bhp +18 Nm |
| Stage 1 EcoPerformance with economy in mind | 81 bhp | 126 Nm | +11 bhp +17 Nm |
| Eco mapEconomy first | 80 bhp | 125 Nm | +10 bhp +16 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Crossblade
On a turbocharged petrol engine a remap adjusts boost, ignition timing and fuelling together, so both power and mid-range torque rise and the car pulls harder out of corners and junctions.
This car is listed with a Bosch MEG1.0/1.1 engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Smart Crossblade 0.6 Turbo 70bhp?
We expect 85bhp and 127Nm against 70bhp and 109Nm as standard: up to +15bhp and +18Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Smart Crossblade 0.6 Turbo 70bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 81bhp and 126Nm expected. The Eco map is economy first: 80bhp and 125Nm. Both still sit above the standard 70bhp and 109Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Smart Crossblade figures
Other petrol variants
All petrol Crossblade variants · Crossblade 2002-2003 overview · All Smart figures