Skoda Yeti (5L) 2009> 2.0 TDI CR 170bhp remap figures
The Skoda Yeti 2.0 TDI CR 170bhp (2009>) is a diesel 2.0L model making 170bhp and 350Nm as standard. After a Stage 1 ECU remap we expect 232bhp and 427Nm - up to 62bhp and 77Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 170 bhp | 232 bhp | +62 bhp |
| Torque | 350 Nm | 427 Nm | +77 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 170 bhp | 350 Nm | |
| Stage 1Maximum software-only performance | 232 bhp | 427 Nm | +62 bhp +77 Nm |
| Stage 1 EcoPerformance with economy in mind | 217 bhp | 421 Nm | +47 bhp +71 Nm |
| Eco mapEconomy first | 212 bhp | 417 Nm | +42 bhp +67 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Yeti
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Bosch EDC17CP14/C46 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Skoda Yeti 2.0 TDI CR 170bhp?
We expect 232bhp and 427Nm against 170bhp and 350Nm as standard: up to +62bhp and +77Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Skoda Yeti 2.0 TDI CR 170bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 217bhp and 421Nm expected. The Eco map is economy first: 212bhp and 417Nm. Both still sit above the standard 170bhp and 350Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Skoda Yeti figures
Other diesel variants
All diesel Yeti (5L) variants · Yeti (5L) 2009> overview · All Skoda figures