Skoda Octavia (1Z) 2004> 2.0 TDI CR 108bhp remap figures
Thinking of remapping a Skoda Octavia 2.0 TDI CR 108bhp? The standard car makes 108bhp and 281Nm; with a Stage 1 remap from our Leicester workshop we expect around 211bhp and 409Nm, up to +103bhp and +128Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 108 bhp | 211 bhp | +103 bhp |
| Torque | 281 Nm | 409 Nm | +128 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 108 bhp | 281 Nm | |
| Stage 1Maximum software-only performance | 211 bhp | 409 Nm | +103 bhp +128 Nm |
| Stage 1 EcoPerformance with economy in mind | 185 bhp | 399 Nm | +77 bhp +118 Nm |
| Eco mapEconomy first | 177 bhp | 392 Nm | +69 bhp +111 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Octavia
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Bosch EDC17CP14/C46 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Skoda Octavia 2.0 TDI CR 108bhp?
We expect 211bhp and 409Nm against 108bhp and 281Nm as standard: up to +103bhp and +128Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Skoda Octavia 2.0 TDI CR 108bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 185bhp and 399Nm expected. The Eco map is economy first: 177bhp and 392Nm. Both still sit above the standard 108bhp and 281Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.