Skoda Karoq 2018> 1.0 TSI 114bhp remap figures
Thinking of remapping a Skoda Karoq 1.0 TSI 114bhp? The standard car makes 114bhp and 201Nm; with a Stage 1 remap from our Leicester workshop we expect around 155bhp and 278Nm, up to +41bhp and +77Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 114 bhp | 155 bhp | +41 bhp |
| Torque | 201 Nm | 278 Nm | +77 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 114 bhp | 201 Nm | |
| Stage 1Maximum software-only performance | 155 bhp | 278 Nm | +41 bhp +77 Nm |
| Stage 1 EcoPerformance with economy in mind | 145 bhp | 272 Nm | +31 bhp +71 Nm |
| Eco mapEconomy first | 141 bhp | 268 Nm | +27 bhp +67 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Karoq
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MED17.1.27. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Skoda Karoq 1.0 TSI 114bhp?
We expect 155bhp and 278Nm against 114bhp and 201Nm as standard: up to +41bhp and +77Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Skoda Karoq 1.0 TSI 114bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 145bhp and 272Nm expected. The Eco map is economy first: 141bhp and 268Nm. Both still sit above the standard 114bhp and 201Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Skoda Karoq figures
Other petrol variants
All petrol Karoq variants · Karoq 2018> overview · All Skoda figures