SEAT Tarraco 2019> 2.0 TDI 150bhp remap figures
Thinking of remapping a SEAT Tarraco 2.0 TDI 150bhp? The standard car makes 150bhp and 340Nm; with a Stage 1 remap from our Leicester workshop we expect around 204bhp and 412Nm, up to +54bhp and +72Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 150 bhp | 204 bhp | +54 bhp |
| Torque | 340 Nm | 412 Nm | +72 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 150 bhp | 340 Nm | |
| Stage 1Maximum software-only performance | 204 bhp | 412 Nm | +54 bhp +72 Nm |
| Stage 1 EcoPerformance with economy in mind | 191 bhp | 406 Nm | +41 bhp +66 Nm |
| Eco mapEconomy first | 186 bhp | 403 Nm | +36 bhp +63 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Tarraco
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Bosch EDC17C74 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the SEAT Tarraco 2.0 TDI 150bhp?
We expect 204bhp and 412Nm against 150bhp and 340Nm as standard: up to +54bhp and +72Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the SEAT Tarraco 2.0 TDI 150bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 191bhp and 406Nm expected. The Eco map is economy first: 186bhp and 403Nm. Both still sit above the standard 150bhp and 340Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More SEAT Tarraco figures
Other diesel variants
All diesel Tarraco variants · Tarraco 2019> overview · All SEAT figures