SEAT Leon 2020> 2.0 Tsi 242bhp Stage 1 Eco remap figures
The Stage 1 Eco map for the SEAT Leon 2.0 Tsi 242bhp (2020>): 304bhp and 489Nm expected from a standard 242bhp and 370Nm, up to +62bhp and +119Nm. It keeps most of the Stage 1 gain (Stage 1 is 325bhp and 499Nm) and is tuned with economy in mind: the choice if you want the performance and care what each tank costs.
Choose your map
Stage 1 Eco remap figures
Stage 1 Eco is performance with economy in mind. It keeps most of the Stage 1 gain, so the car still pulls well, but the map is shaped for efficient, relaxed driving rather than flat-out output. It is above the standard figures. We don't quote mpg, because economy depends on the car and how it is driven.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 242 bhp | 304 bhp | +62 bhp |
| Torque | 370 Nm | 489 Nm | +119 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 242 bhp | 370 Nm | |
| Stage 1Maximum software-only performance | 325 bhp | 499 Nm | +83 bhp +129 Nm |
| Stage 1 EcoPerformance with economy in mind | 304 bhp | 489 Nm | +62 bhp +119 Nm |
| Eco mapEconomy first | 298 bhp | 482 Nm | +56 bhp +112 Nm |
Who is the Stage 1 Eco map for?
- Drivers who want a quicker, more responsive car, tuned with economy in mind.
- Daily drivers who want strong mid-range pull without giving up efficiency.
- Anyone who would otherwise take full Stage 1 but cares what each tank costs.
How Stage 1 Eco compares with Stage 1
Full Stage 1 on this SEAT Leon is expected to give 325bhp and 499Nm (+83bhp, +129Nm). The Stage 1 Eco keeps about 75% of that power gain and 92% of the torque gain, so you get 304bhp and 489Nm: 21bhp less and 10Nm less than Stage 1, with the map shaped for efficient, relaxed driving, so it suits you if you want the pull and care about running costs. Both sit above the standard 242bhp and 370Nm.
What this means for your Leon
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Continental Simos 19.6 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 Eco questions
How much power does the Stage 1 Eco map give the SEAT Leon 2.0 Tsi 242bhp?
We expect 304bhp and 489Nm against 242bhp and 370Nm as standard: up to +62bhp and +119Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
How does Stage 1 Eco differ from Stage 1 on this engine?
Full Stage 1 is expected to give 325bhp and 499Nm. Stage 1 Eco gives 21bhp less and 10Nm less, in exchange for a map shaped with economy in mind. It still sits above the standard figures.
Is Stage 1 Eco or the Eco map better for me?
Choose Stage 1 Eco if you want the performance (304bhp and 489Nm) and still care about running costs. Choose the Eco map (298bhp and 482Nm) if economy matters more than pace.
Will the Stage 1 Eco map save fuel?
It is tuned with economy in mind while keeping most of the Stage 1 performance. We do not quote mpg figures, because economy depends on the car, its condition and how it is driven.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More SEAT Leon figures
Other petrol variants
All petrol Leon variants · Leon 2020> overview · All SEAT figures