SEAT Cordoba (6L) 2003-2009 1.9 TDi PD 100bhp remap figures
Thinking of remapping a SEAT Cordoba 1.9 TDi PD 100bhp? The standard car makes 100bhp and 240Nm; with a Stage 1 remap from our Leicester workshop we expect around 162bhp and 345Nm, up to +62bhp and +105Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 100 bhp | 162 bhp | +62 bhp |
| Torque | 240 Nm | 345 Nm | +105 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 100 bhp | 240 Nm | |
| Stage 1Maximum software-only performance | 162 bhp | 345 Nm | +62 bhp +105 Nm |
| Stage 1 EcoPerformance with economy in mind | 147 bhp | 337 Nm | +47 bhp +97 Nm |
| Eco mapEconomy first | 142 bhp | 331 Nm | +42 bhp +91 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Cordoba
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC15P+. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the SEAT Cordoba 1.9 TDi PD 100bhp?
We expect 162bhp and 345Nm against 100bhp and 240Nm as standard: up to +62bhp and +105Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the SEAT Cordoba 1.9 TDi PD 100bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 147bhp and 337Nm expected. The Eco map is economy first: 142bhp and 331Nm. Both still sit above the standard 100bhp and 240Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More SEAT Cordoba figures
Other diesel variants
All diesel Cordoba (6L) variants · Cordoba (6L) 2003-2009 overview · All SEAT figures