SEAT Ateca 2018> 2.0 Tsi Cupra 300bhp remap figures
The SEAT Ateca 2.0 Tsi Cupra 300bhp (2018>) is a petrol 2.0L model making 300bhp and 400Nm as standard. After a Stage 1 ECU remap we expect 370bhp and 524Nm - up to 70bhp and 124Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 300 bhp | 370 bhp | +70 bhp |
| Torque | 400 Nm | 524 Nm | +124 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 300 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 370 bhp | 524 Nm | +70 bhp +124 Nm |
| Stage 1 EcoPerformance with economy in mind | 353 bhp | 514 Nm | +53 bhp +114 Nm |
| Eco mapEconomy first | 347 bhp | 508 Nm | +47 bhp +108 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Ateca
On a turbocharged petrol engine a remap adjusts boost, ignition timing and fuelling together, so both power and mid-range torque rise and the car pulls harder out of corners and junctions.
The ECU recorded for this variant is a Continental Simos 18. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the SEAT Ateca 2.0 Tsi Cupra 300bhp?
We expect 370bhp and 524Nm against 300bhp and 400Nm as standard: up to +70bhp and +124Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the SEAT Ateca 2.0 Tsi Cupra 300bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 353bhp and 514Nm expected. The Eco map is economy first: 347bhp and 508Nm. Both still sit above the standard 300bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More SEAT Ateca figures
Other petrol variants
All petrol Ateca variants · Ateca 2016> overview · All SEAT figures