Scania R620 2006> 15.6l EUR 4 DC 16 05 - PDE 560bhp remap figures
Thinking of remapping a Scania R620 15.6l EUR 4 DC 16 05 - PDE 560bhp? The standard car makes 560bhp and 2699Nm; with a Stage 1 remap from our Leicester workshop we expect around 655bhp and 3111Nm, up to +95bhp and +412Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 560 bhp | 655 bhp | +95 bhp |
| Torque | 2699 Nm | 3111 Nm | +412 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 560 bhp | 2699 Nm | |
| Stage 1Maximum software-only performance | 655 bhp | 3111 Nm | +95 bhp +412 Nm |
| Stage 1 EcoPerformance with economy in mind | 631 bhp | 3078 Nm | +71 bhp +379 Nm |
| Eco mapEconomy first | 624 bhp | 3057 Nm | +64 bhp +358 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your R620
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Motorola EMS S7 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Scania R620 15.6l EUR 4 DC 16 05 - PDE 560bhp?
We expect 655bhp and 3111Nm against 560bhp and 2699Nm as standard: up to +95bhp and +412Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Scania R620 15.6l EUR 4 DC 16 05 - PDE 560bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 631bhp and 3078Nm expected. The Eco map is economy first: 624bhp and 3057Nm. Both still sit above the standard 560bhp and 2699Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Scania R620 figures
Other diesel variants
All diesel R620 variants · R620 2006> overview · All Scania figures