Scania R580 2007> 15.1l EUR 4 DC 16 XX - XPI 580bhp remap figures
Thinking of remapping a Scania R580 15.1l EUR 4 DC 16 XX - XPI 580bhp? The standard car makes 580bhp and 2750Nm; with a Stage 1 remap from our Leicester workshop we expect around 675bhp and 3161Nm, up to +95bhp and +411Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 580 bhp | 675 bhp | +95 bhp |
| Torque | 2750 Nm | 3161 Nm | +411 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 580 bhp | 2750 Nm | |
| Stage 1Maximum software-only performance | 675 bhp | 3161 Nm | +95 bhp +411 Nm |
| Stage 1 EcoPerformance with economy in mind | 651 bhp | 3128 Nm | +71 bhp +378 Nm |
| Eco mapEconomy first | 644 bhp | 3108 Nm | +64 bhp +358 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your R580
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Motorola EMS S6 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Scania R580 15.1l EUR 4 DC 16 XX - XPI 580bhp?
We expect 675bhp and 3161Nm against 580bhp and 2750Nm as standard: up to +95bhp and +411Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Scania R580 15.1l EUR 4 DC 16 XX - XPI 580bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 651bhp and 3128Nm expected. The Eco map is economy first: 644bhp and 3108Nm. Both still sit above the standard 580bhp and 2750Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Scania R580 figures
Other diesel variants
All diesel R580 variants · R580 2004> overview · All Scania figures