Scania R560 2006> 15.6l EUR 4 DC 16 08 - PDE 620bhp remap figures
Stock, this 2006> Scania R560 diesel (15.6L) produces 620bhp and 3000Nm. Our expected figures for a Stage 1 remap are 715bhp and 3412Nm, an expected gain of up to 95bhp and 412Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 620 bhp | 715 bhp | +95 bhp |
| Torque | 3000 Nm | 3412 Nm | +412 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 620 bhp | 3000 Nm | |
| Stage 1Maximum software-only performance | 715 bhp | 3412 Nm | +95 bhp +412 Nm |
| Stage 1 EcoPerformance with economy in mind | 691 bhp | 3379 Nm | +71 bhp +379 Nm |
| Eco mapEconomy first | 684 bhp | 3358 Nm | +64 bhp +358 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your R560
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Motorola EMS S7. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Scania R560 15.6l EUR 4 DC 16 08 - PDE 620bhp?
We expect 715bhp and 3412Nm against 620bhp and 3000Nm as standard: up to +95bhp and +412Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Scania R560 15.6l EUR 4 DC 16 08 - PDE 620bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 691bhp and 3379Nm expected. The Eco map is economy first: 684bhp and 3358Nm. Both still sit above the standard 620bhp and 3000Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Scania R560 figures
Other diesel variants
- 15.6l EUR 4 DC 16 05 - PDE 560bhp 2006>
- 15.6l EUR 5 DC 16 18 - PDE 560bhp 2006>
- 15.6l EUR 4 DC 16 06 - PDE 500bhp 2006>
All diesel R560 variants · R560 2006> overview · All Scania figures