Renault Trucks Kerax 2006-2009 10.8l EUR 4 DXi11 410bhp remap figures
Thinking of remapping a Renault Trucks Kerax 10.8l EUR 4 DXi11 410bhp? The standard car makes 410bhp and 1900Nm; with a Stage 1 remap from our Leicester workshop we expect around 475bhp and 2121Nm, up to +65bhp and +221Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 410 bhp | 475 bhp | +65 bhp |
| Torque | 1900 Nm | 2121 Nm | +221 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 410 bhp | 1900 Nm | |
| Stage 1Maximum software-only performance | 475 bhp | 2121 Nm | +65 bhp +221 Nm |
| Stage 1 EcoPerformance with economy in mind | 459 bhp | 2103 Nm | +49 bhp +203 Nm |
| Eco mapEconomy first | 454 bhp | 2092 Nm | +44 bhp +192 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Kerax
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch MS6.2. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Renault Trucks Kerax 10.8l EUR 4 DXi11 410bhp?
We expect 475bhp and 2121Nm against 410bhp and 1900Nm as standard: up to +65bhp and +221Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Renault Trucks Kerax 10.8l EUR 4 DXi11 410bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 459bhp and 2103Nm expected. The Eco map is economy first: 454bhp and 2092Nm. Both still sit above the standard 410bhp and 1900Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Renault Trucks Kerax figures
Other diesel variants
- 11.1l EUR 3 412bhp 2001-2005
- 10.8l EUR 4 DXi11 370bhp 2006-2009
- 10.8l EUR 4 DXi11 450bhp 2006-2009
- 11.1l EUR 3 360bhp 2001-2005
- 7.2l EUR 4 DXi7 320bhp 2006-2009
- 9.8l EUR 3 311bhp 2001-2005
- 7.2l EUR 4 DXi7 280bhp 2006-2009
- 9.8l EUR 3 265bhp 2001-2005
- 7.2l EUR 4 DXi7 240bhp 2006-2009
All diesel Kerax variants · Kerax 2001-2009 overview · All Renault Trucks figures