Peugeot RCZ 2010> 1.6 THP 200bhp remap figures
The Peugeot RCZ 1.6 THP 200bhp (2010>) is a petrol 1.6L model making 200bhp and 279Nm as standard. After a Stage 1 ECU remap we expect 240bhp and 337Nm - up to 40bhp and 58Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 200 bhp | 240 bhp | +40 bhp |
| Torque | 279 Nm | 337 Nm | +58 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 200 bhp | 279 Nm | |
| Stage 1Maximum software-only performance | 240 bhp | 337 Nm | +40 bhp +58 Nm |
| Stage 1 EcoPerformance with economy in mind | 230 bhp | 332 Nm | +30 bhp +53 Nm |
| Eco mapEconomy first | 227 bhp | 329 Nm | +27 bhp +50 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your RCZ
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
Engine management is by a Bosch MED17.4.2 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot RCZ 1.6 THP 200bhp?
We expect 240bhp and 337Nm against 200bhp and 279Nm as standard: up to +40bhp and +58Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot RCZ 1.6 THP 200bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 230bhp and 332Nm expected. The Eco map is economy first: 227bhp and 329Nm. Both still sit above the standard 200bhp and 279Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot RCZ figures
Other petrol variants
All petrol RCZ variants · RCZ 2010> overview · All Peugeot figures