Peugeot Partner 2018> 1.2 PureTech 127bhp remap figures
Thinking of remapping a Peugeot Partner 1.2 PureTech 127bhp? The standard car makes 127bhp and 231Nm; with a Stage 1 remap from our Leicester workshop we expect around 160bhp and 276Nm, up to +33bhp and +45Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 127 bhp | 160 bhp | +33 bhp |
| Torque | 231 Nm | 276 Nm | +45 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 127 bhp | 231 Nm | |
| Stage 1Maximum software-only performance | 160 bhp | 276 Nm | +33 bhp +45 Nm |
| Stage 1 EcoPerformance with economy in mind | 152 bhp | 272 Nm | +25 bhp +41 Nm |
| Eco mapEconomy first | 149 bhp | 270 Nm | +22 bhp +39 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Partner
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
The ECU recorded for this variant is a Valeo VD56. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot Partner 1.2 PureTech 127bhp?
We expect 160bhp and 276Nm against 127bhp and 231Nm as standard: up to +33bhp and +45Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot Partner 1.2 PureTech 127bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 152bhp and 272Nm expected. The Eco map is economy first: 149bhp and 270Nm. Both still sit above the standard 127bhp and 231Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot Partner figures
Other petrol variants
All petrol Partner variants · Partner 2018> overview · All Peugeot figures