Peugeot Partner 2008> 1.6 16v 110bhp remap figures
The Peugeot Partner 1.6 16v 110bhp (2008>) is a petrol 1.6L model making 110bhp and 146Nm as standard. After a Stage 1 ECU remap we expect 125bhp and 165Nm - up to 15bhp and 19Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 110 bhp | 125 bhp | +15 bhp |
| Torque | 146 Nm | 165 Nm | +19 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 110 bhp | 146 Nm | |
| Stage 1Maximum software-only performance | 125 bhp | 165 Nm | +15 bhp +19 Nm |
| Stage 1 EcoPerformance with economy in mind | 121 bhp | 163 Nm | +11 bhp +17 Nm |
| Eco mapEconomy first | 120 bhp | 163 Nm | +10 bhp +17 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Partner
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Bosch ME7.4.4 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot Partner 1.6 16v 110bhp?
We expect 125bhp and 165Nm against 110bhp and 146Nm as standard: up to +15bhp and +19Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot Partner 1.6 16v 110bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 121bhp and 163Nm expected. The Eco map is economy first: 120bhp and 163Nm. Both still sit above the standard 110bhp and 146Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot Partner figures
Other petrol variants
All petrol Partner variants · Partner 2008-2012 overview · All Peugeot figures