Peugeot Partner 2002-2008 1.6 HDi 75bhp remap figures
The Peugeot Partner 1.6 HDi 75bhp (2002-2008) is a diesel 1.6L model making 75bhp and 184Nm as standard. After a Stage 1 ECU remap we expect 117bhp and 256Nm - up to 42bhp and 72Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 75 bhp | 117 bhp | +42 bhp |
| Torque | 184 Nm | 256 Nm | +72 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 75 bhp | 184 Nm | |
| Stage 1Maximum software-only performance | 117 bhp | 256 Nm | +42 bhp +72 Nm |
| Stage 1 EcoPerformance with economy in mind | 107 bhp | 250 Nm | +32 bhp +66 Nm |
| Eco mapEconomy first | 103 bhp | 247 Nm | +28 bhp +63 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Partner
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC16C34. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot Partner 1.6 HDi 75bhp?
We expect 117bhp and 256Nm against 75bhp and 184Nm as standard: up to +42bhp and +72Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot Partner 1.6 HDi 75bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 107bhp and 250Nm expected. The Eco map is economy first: 103bhp and 247Nm. Both still sit above the standard 75bhp and 184Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot Partner figures
Other diesel variants
All diesel Partner variants · Partner 2002-2008 overview · All Peugeot figures