Peugeot 508 2018> 1.6 Puretech GT 220bhp remap figures
Thinking of remapping a Peugeot 508 1.6 Puretech GT 220bhp? The standard car makes 220bhp and 300Nm; with a Stage 1 remap from our Leicester workshop we expect around 250bhp and 337Nm, up to +30bhp and +37Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 220 bhp | 250 bhp | +30 bhp |
| Torque | 300 Nm | 337 Nm | +37 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 220 bhp | 300 Nm | |
| Stage 1Maximum software-only performance | 250 bhp | 337 Nm | +30 bhp +37 Nm |
| Stage 1 EcoPerformance with economy in mind | 243 bhp | 334 Nm | +23 bhp +34 Nm |
| Eco mapEconomy first | 240 bhp | 332 Nm | +20 bhp +32 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 508
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MG1CS042 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot 508 1.6 Puretech GT 220bhp?
We expect 250bhp and 337Nm against 220bhp and 300Nm as standard: up to +30bhp and +37Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot 508 1.6 Puretech GT 220bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 243bhp and 334Nm expected. The Eco map is economy first: 240bhp and 332Nm. Both still sit above the standard 220bhp and 300Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot 508 figures
Other petrol variants
All petrol 508 variants · 508 2018> overview · All Peugeot figures