Peugeot 308 2015> 1.6 THP 246bhp remap figures
Thinking of remapping a Peugeot 308 1.6 THP 246bhp? The standard car makes 246bhp and 330Nm; with a Stage 1 remap from our Leicester workshop we expect around 281bhp and 378Nm, up to +35bhp and +48Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 246 bhp | 281 bhp | +35 bhp |
| Torque | 330 Nm | 378 Nm | +48 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 246 bhp | 330 Nm | |
| Stage 1Maximum software-only performance | 281 bhp | 378 Nm | +35 bhp +48 Nm |
| Stage 1 EcoPerformance with economy in mind | 272 bhp | 374 Nm | +26 bhp +44 Nm |
| Eco mapEconomy first | 269 bhp | 372 Nm | +23 bhp +42 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your 308
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Bosch MEVD17.4.4. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot 308 1.6 THP 246bhp?
We expect 281bhp and 378Nm against 246bhp and 330Nm as standard: up to +35bhp and +48Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot 308 1.6 THP 246bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 272bhp and 374Nm expected. The Eco map is economy first: 269bhp and 372Nm. Both still sit above the standard 246bhp and 330Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot 308 figures
Other petrol variants
All petrol 308 variants · 308 2013> overview · All Peugeot figures