Peugeot 308 2007-2013 1.4 Vti 98bhp remap figures
Stock, this 2007-2013 Peugeot 308 petrol (1.4L) produces 98bhp and 136Nm. Our expected figures for a Stage 1 remap are 110bhp and 151Nm, an expected gain of up to 12bhp and 15Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 98 bhp | 110 bhp | +12 bhp |
| Torque | 136 Nm | 151 Nm | +15 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 98 bhp | 136 Nm | |
| Stage 1Maximum software-only performance | 110 bhp | 151 Nm | +12 bhp +15 Nm |
| Stage 1 EcoPerformance with economy in mind | 107 bhp | 150 Nm | +9 bhp +14 Nm |
| Eco mapEconomy first | 106 bhp | 149 Nm | +8 bhp +13 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 308
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Bosch MEV17.4.2 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot 308 1.4 Vti 98bhp?
We expect 110bhp and 151Nm against 98bhp and 136Nm as standard: up to +12bhp and +15Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot 308 1.4 Vti 98bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 107bhp and 150Nm expected. The Eco map is economy first: 106bhp and 149Nm. Both still sit above the standard 98bhp and 136Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.