Peugeot 308 2007-2013 2.0 HDi 136bhp remap figures
Thinking of remapping a Peugeot 308 2.0 HDi 136bhp? The standard car makes 136bhp and 325Nm; with a Stage 1 remap from our Leicester workshop we expect around 185bhp and 405Nm, up to +49bhp and +80Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 136 bhp | 185 bhp | +49 bhp |
| Torque | 325 Nm | 405 Nm | +80 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 136 bhp | 325 Nm | |
| Stage 1Maximum software-only performance | 185 bhp | 405 Nm | +49 bhp +80 Nm |
| Stage 1 EcoPerformance with economy in mind | 173 bhp | 399 Nm | +37 bhp +74 Nm |
| Eco mapEconomy first | 169 bhp | 395 Nm | +33 bhp +70 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your 308
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Delphi DCM3.4 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot 308 2.0 HDi 136bhp?
We expect 185bhp and 405Nm against 136bhp and 325Nm as standard: up to +49bhp and +80Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot 308 2.0 HDi 136bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 173bhp and 399Nm expected. The Eco map is economy first: 169bhp and 395Nm. Both still sit above the standard 136bhp and 325Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot 308 figures
Other diesel variants
- 2.0 HDi 150bhp 2007-2013
- 1.6 e-HDi 112bhp 2007-2013
- 1.6 HDi 110bhp 2007-2013
- 2.0 HDi 163bhp 2007-2013
- 1.6 HDI 92bhp 2007-2013
- 1.6 HDi 90bhp 2007-2013
All diesel 308 variants · 308 2007-2013 overview · All Peugeot figures