Peugeot 2008 2019> 1.2 PureTech GT 150bhp remap figures
Stock, this 2019> Peugeot 2008 petrol (1.2L) produces 150bhp and 240Nm. Our expected figures for a Stage 1 remap are 175bhp and 290Nm, an expected gain of up to 25bhp and 50Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 150 bhp | 175 bhp | +25 bhp |
| Torque | 240 Nm | 290 Nm | +50 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 150 bhp | 240 Nm | |
| Stage 1Maximum software-only performance | 175 bhp | 290 Nm | +25 bhp +50 Nm |
| Stage 1 EcoPerformance with economy in mind | 169 bhp | 286 Nm | +19 bhp +46 Nm |
| Eco mapEconomy first | 167 bhp | 284 Nm | +17 bhp +44 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 2008
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Valeo VD56 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot 2008 1.2 PureTech GT 150bhp?
We expect 175bhp and 290Nm against 150bhp and 240Nm as standard: up to +25bhp and +50Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot 2008 1.2 PureTech GT 150bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 169bhp and 286Nm expected. The Eco map is economy first: 167bhp and 284Nm. Both still sit above the standard 150bhp and 240Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot 2008 figures
Other petrol variants
All petrol 2008 variants · 2008 2019> overview · All Peugeot figures