Peugeot 2008 2013> 1.4 Hdi 69bhp remap figures
Thinking of remapping a Peugeot 2008 1.4 Hdi 69bhp? The standard car makes 69bhp and 160Nm; with a Stage 1 remap from our Leicester workshop we expect around 99bhp and 202Nm, up to +30bhp and +42Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 69 bhp | 99 bhp | +30 bhp |
| Torque | 160 Nm | 202 Nm | +42 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 69 bhp | 160 Nm | |
| Stage 1Maximum software-only performance | 99 bhp | 202 Nm | +30 bhp +42 Nm |
| Stage 1 EcoPerformance with economy in mind | 92 bhp | 199 Nm | +23 bhp +39 Nm |
| Eco mapEconomy first | 89 bhp | 197 Nm | +20 bhp +37 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your 2008
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC17C10. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot 2008 1.4 Hdi 69bhp?
We expect 99bhp and 202Nm against 69bhp and 160Nm as standard: up to +30bhp and +42Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot 2008 1.4 Hdi 69bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 92bhp and 199Nm expected. The Eco map is economy first: 89bhp and 197Nm. Both still sit above the standard 69bhp and 160Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot 2008 figures
Other diesel variants
- 1.6 BlueHDi 73bhp 2015>
- 1.6 e-Hdi 90bhp 2013>
- 1.6 BlueHDi 97bhp 2015>
- 1.6 e-Hdi 113bhp 2013>
- 1.6 BlueHDi 118bhp 2015>
All diesel 2008 variants · 2008 2013-2019 overview · All Peugeot figures