Peugeot 108 2015> 1.2 PureTech 80bhp remap figures
Thinking of remapping a Peugeot 108 1.2 PureTech 80bhp? The standard car makes 80bhp and 118Nm; with a Stage 1 remap from our Leicester workshop we expect around 90bhp and 130Nm, up to +10bhp and +12Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 80 bhp | 90 bhp | +10 bhp |
| Torque | 118 Nm | 130 Nm | +12 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 80 bhp | 118 Nm | |
| Stage 1Maximum software-only performance | 90 bhp | 130 Nm | +10 bhp +12 Nm |
| Stage 1 EcoPerformance with economy in mind | 88 bhp | 129 Nm | +8 bhp +11 Nm |
| Eco mapEconomy first | 87 bhp | 128 Nm | +7 bhp +10 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 108
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Valeo VD46 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot 108 1.2 PureTech 80bhp?
We expect 90bhp and 130Nm against 80bhp and 118Nm as standard: up to +10bhp and +12Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot 108 1.2 PureTech 80bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 88bhp and 129Nm expected. The Eco map is economy first: 87bhp and 128Nm. Both still sit above the standard 80bhp and 118Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot 108 figures
Other petrol variants
All petrol 108 variants · 108 2014> overview · All Peugeot figures