Peugeot 1007 2005-2009 1.6 HDi 111bhp remap figures
Thinking of remapping a Peugeot 1007 1.6 HDi 111bhp? The standard car makes 111bhp and 263Nm; with a Stage 1 remap from our Leicester workshop we expect around 147bhp and 317Nm, up to +36bhp and +54Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 111 bhp | 147 bhp | +36 bhp |
| Torque | 263 Nm | 317 Nm | +54 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 111 bhp | 263 Nm | |
| Stage 1Maximum software-only performance | 147 bhp | 317 Nm | +36 bhp +54 Nm |
| Stage 1 EcoPerformance with economy in mind | 138 bhp | 313 Nm | +27 bhp +50 Nm |
| Eco mapEconomy first | 135 bhp | 310 Nm | +24 bhp +47 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your 1007
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Bosch EDC16C34 unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Peugeot 1007 1.6 HDi 111bhp?
We expect 147bhp and 317Nm against 111bhp and 263Nm as standard: up to +36bhp and +54Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Peugeot 1007 1.6 HDi 111bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 138bhp and 313Nm expected. The Eco map is economy first: 135bhp and 310Nm. Both still sit above the standard 111bhp and 263Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Peugeot 1007 figures
Other diesel variants
All diesel 1007 variants · 1007 2005-2009 overview · All Peugeot figures