Nissan X Trail 2007-2013 2.0 dCi 170bhp remap figures
Stock, this 2007-2013 Nissan X Trail diesel (2.0L) produces 170bhp and 361Nm. Our expected figures for a Stage 1 remap are 226bhp and 447Nm, an expected gain of up to 56bhp and 86Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 170 bhp | 226 bhp | +56 bhp |
| Torque | 361 Nm | 447 Nm | +86 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 170 bhp | 361 Nm | |
| Stage 1Maximum software-only performance | 226 bhp | 447 Nm | +56 bhp +86 Nm |
| Stage 1 EcoPerformance with economy in mind | 212 bhp | 440 Nm | +42 bhp +79 Nm |
| Eco mapEconomy first | 208 bhp | 436 Nm | +38 bhp +75 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your X Trail
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch EDC16CP33 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Nissan X Trail 2.0 dCi 170bhp?
We expect 226bhp and 447Nm against 170bhp and 361Nm as standard: up to +56bhp and +86Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Nissan X Trail 2.0 dCi 170bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 212bhp and 440Nm expected. The Eco map is economy first: 208bhp and 436Nm. Both still sit above the standard 170bhp and 361Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Nissan X Trail figures
Other diesel variants
All diesel X Trail variants · X Trail 2007-2013 overview · All Nissan figures