Nissan Navara (D23) 2016> 2.3 DCI 160bhp remap figures
The Nissan Navara 2.3 DCI 160bhp (2016>) is a diesel 2.3L model making 160bhp and 403Nm as standard. After a Stage 1 ECU remap we expect 200bhp and 459Nm - up to 40bhp and 56Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 160 bhp | 200 bhp | +40 bhp |
| Torque | 403 Nm | 459 Nm | +56 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 160 bhp | 403 Nm | |
| Stage 1Maximum software-only performance | 200 bhp | 459 Nm | +40 bhp +56 Nm |
| Stage 1 EcoPerformance with economy in mind | 190 bhp | 455 Nm | +30 bhp +52 Nm |
| Eco mapEconomy first | 187 bhp | 452 Nm | +27 bhp +49 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Navara
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Continental SID310 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Nissan Navara 2.3 DCI 160bhp?
We expect 200bhp and 459Nm against 160bhp and 403Nm as standard: up to +40bhp and +56Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Nissan Navara 2.3 DCI 160bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 190bhp and 455Nm expected. The Eco map is economy first: 187bhp and 452Nm. Both still sit above the standard 160bhp and 403Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Nissan Navara figures
Other diesel variants
All diesel Navara (D23) variants · Navara (D23) 2016> overview · All Nissan figures