Nissan Almera Tino 2000-2005 2.2 DCi 134bhp remap figures
The Nissan Almera Tino 2.2 DCi 134bhp (2000-2005) is a diesel 2.2L model making 134bhp and 304Nm as standard. After a Stage 1 ECU remap we expect 175bhp and 368Nm - up to 41bhp and 64Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 134 bhp | 175 bhp | +41 bhp |
| Torque | 304 Nm | 368 Nm | +64 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 134 bhp | 304 Nm | |
| Stage 1Maximum software-only performance | 175 bhp | 368 Nm | +41 bhp +64 Nm |
| Stage 1 EcoPerformance with economy in mind | 165 bhp | 363 Nm | +31 bhp +59 Nm |
| Eco mapEconomy first | 161 bhp | 360 Nm | +27 bhp +56 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Almera Tino
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Denso D3. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Nissan Almera Tino 2.2 DCi 134bhp?
We expect 175bhp and 368Nm against 134bhp and 304Nm as standard: up to +41bhp and +64Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Nissan Almera Tino 2.2 DCi 134bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 165bhp and 363Nm expected. The Eco map is economy first: 161bhp and 360Nm. Both still sit above the standard 134bhp and 304Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Nissan Almera Tino figures
Other diesel variants
All diesel Almera Tino variants · Almera Tino 2000-2005 overview · All Nissan figures