Mitsubishi Shogun 2007> 3.2 DI-DC 158bhp remap figures
The Mitsubishi Shogun 3.2 DI-DC 158bhp (2007>) is a diesel 3.2L model making 158bhp and 381Nm as standard. After a Stage 1 ECU remap we expect 205bhp and 474Nm - up to 47bhp and 93Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 158 bhp | 205 bhp | +47 bhp |
| Torque | 381 Nm | 474 Nm | +93 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 158 bhp | 381 Nm | |
| Stage 1Maximum software-only performance | 205 bhp | 474 Nm | +47 bhp +93 Nm |
| Stage 1 EcoPerformance with economy in mind | 193 bhp | 467 Nm | +35 bhp +86 Nm |
| Eco mapEconomy first | 189 bhp | 462 Nm | +31 bhp +81 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Shogun
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Denso RHF4 engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mitsubishi Shogun 3.2 DI-DC 158bhp?
We expect 205bhp and 474Nm against 158bhp and 381Nm as standard: up to +47bhp and +93Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mitsubishi Shogun 3.2 DI-DC 158bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 193bhp and 467Nm expected. The Eco map is economy first: 189bhp and 462Nm. Both still sit above the standard 158bhp and 381Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mitsubishi Shogun figures
Other diesel variants
All diesel Shogun variants · Shogun 2007> overview · All Mitsubishi figures