Mitsubishi Lancer EVO X 2008-2014 2.0 FQ-300 291bhp remap figures
Thinking of remapping a Mitsubishi Lancer EVO X 2.0 FQ-300 291bhp? The standard car makes 291bhp and 407Nm; with a Stage 1 remap from our Leicester workshop we expect around 335bhp and 480Nm, up to +44bhp and +73Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 291 bhp | 335 bhp | +44 bhp |
| Torque | 407 Nm | 480 Nm | +73 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 291 bhp | 407 Nm | |
| Stage 1Maximum software-only performance | 335 bhp | 480 Nm | +44 bhp +73 Nm |
| Stage 1 EcoPerformance with economy in mind | 324 bhp | 474 Nm | +33 bhp +67 Nm |
| Eco mapEconomy first | 320 bhp | 471 Nm | +29 bhp +64 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Lancer EVO X
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Mitsubishi E6T72xxx unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mitsubishi Lancer EVO X 2.0 FQ-300 291bhp?
We expect 335bhp and 480Nm against 291bhp and 407Nm as standard: up to +44bhp and +73Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mitsubishi Lancer EVO X 2.0 FQ-300 291bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 324bhp and 474Nm expected. The Eco map is economy first: 320bhp and 471Nm. Both still sit above the standard 291bhp and 407Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mitsubishi Lancer EVO X figures
Other petrol variants
All petrol Lancer EVO X variants · Lancer EVO X 2008-2014 overview · All Mitsubishi figures