Mitsubishi L200 2015-2018 2.4 DI-D 178bhp remap figures
The Mitsubishi L200 2.4 DI-D 178bhp (2015-2018) is a diesel 2.4L model making 178bhp and 430Nm as standard. After a Stage 1 ECU remap we expect 225bhp and 486Nm - up to 47bhp and 56Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 178 bhp | 225 bhp | +47 bhp |
| Torque | 430 Nm | 486 Nm | +56 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 178 bhp | 430 Nm | |
| Stage 1Maximum software-only performance | 225 bhp | 486 Nm | +47 bhp +56 Nm |
| Stage 1 EcoPerformance with economy in mind | 213 bhp | 482 Nm | +35 bhp +52 Nm |
| Eco mapEconomy first | 209 bhp | 479 Nm | +31 bhp +49 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your L200
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Denso RA6 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mitsubishi L200 2.4 DI-D 178bhp?
We expect 225bhp and 486Nm against 178bhp and 430Nm as standard: up to +47bhp and +56Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mitsubishi L200 2.4 DI-D 178bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 213bhp and 482Nm expected. The Eco map is economy first: 209bhp and 479Nm. Both still sit above the standard 178bhp and 430Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mitsubishi L200 figures
Other diesel variants
All diesel L200 variants · L200 2015-2018 overview · All Mitsubishi figures