Mitsubishi Grandis 2004-2010 2.0 D-ID 134bhp remap figures
The Mitsubishi Grandis 2.0 D-ID 134bhp (2004-2010) is a diesel 2.0L model making 134bhp and 309Nm as standard. After a Stage 1 ECU remap we expect 193bhp and 412Nm - up to 59bhp and 103Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 134 bhp | 193 bhp | +59 bhp |
| Torque | 309 Nm | 412 Nm | +103 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 134 bhp | 309 Nm | |
| Stage 1Maximum software-only performance | 193 bhp | 412 Nm | +59 bhp +103 Nm |
| Stage 1 EcoPerformance with economy in mind | 178 bhp | 404 Nm | +44 bhp +95 Nm |
| Eco mapEconomy first | 174 bhp | 399 Nm | +40 bhp +90 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Grandis
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
The ECU recorded for this variant is a Bosch EDC16U31/34. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mitsubishi Grandis 2.0 D-ID 134bhp?
We expect 193bhp and 412Nm against 134bhp and 309Nm as standard: up to +59bhp and +103Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mitsubishi Grandis 2.0 D-ID 134bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 178bhp and 404Nm expected. The Eco map is economy first: 174bhp and 399Nm. Both still sit above the standard 134bhp and 309Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mitsubishi Grandis figures
Other diesel variants
All diesel Grandis variants · Grandis 2004-2010 overview · All Mitsubishi figures