Mitsubishi Galant 1997-2003 2.4 GDI 147bhp remap figures
Thinking of remapping a Mitsubishi Galant 2.4 GDI 147bhp? The standard car makes 147bhp and 225Nm; with a Stage 1 remap from our Leicester workshop we expect around 165bhp and 236Nm, up to +18bhp and +11Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 147 bhp | 165 bhp | +18 bhp |
| Torque | 225 Nm | 236 Nm | +11 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 147 bhp | 225 Nm | |
| Stage 1Maximum software-only performance | 165 bhp | 236 Nm | +18 bhp +11 Nm |
| Stage 1 EcoPerformance with economy in mind | 161 bhp | 235 Nm | +14 bhp +10 Nm |
| Eco mapEconomy first | 159 bhp | 235 Nm | +12 bhp +10 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Galant
Naturally aspirated petrol engines have no boost to raise, so gains from software alone are more modest than on a turbocharged car and come from fuelling, ignition and throttle response.
Engine management is by a Melco MH72X unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mitsubishi Galant 2.4 GDI 147bhp?
We expect 165bhp and 236Nm against 147bhp and 225Nm as standard: up to +18bhp and +11Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mitsubishi Galant 2.4 GDI 147bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 161bhp and 235Nm expected. The Eco map is economy first: 159bhp and 235Nm. Both still sit above the standard 147bhp and 225Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mitsubishi Galant figures
Other petrol variants
All petrol Galant variants · Galant 1997-2003 overview · All Mitsubishi figures