MINI John Cooper Works (R56) 2012-2013 1.6 JCW 214bhp remap figures
Stock, this 2012-2013 MINI John Cooper Works petrol (1.6L) produces 214bhp and 281Nm. Our expected figures for a Stage 1 remap are 252bhp and 352Nm, an expected gain of up to 38bhp and 71Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 214 bhp | 252 bhp | +38 bhp |
| Torque | 281 Nm | 352 Nm | +71 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 214 bhp | 281 Nm | |
| Stage 1Maximum software-only performance | 252 bhp | 352 Nm | +38 bhp +71 Nm |
| Stage 1 EcoPerformance with economy in mind | 243 bhp | 346 Nm | +29 bhp +65 Nm |
| Eco mapEconomy first | 239 bhp | 343 Nm | +25 bhp +62 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your John Cooper Works
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
The ECU recorded for this variant is a Bosch MEV17.2.2. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the MINI John Cooper Works 1.6 JCW 214bhp?
We expect 252bhp and 352Nm against 214bhp and 281Nm as standard: up to +38bhp and +71Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the MINI John Cooper Works 1.6 JCW 214bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 243bhp and 346Nm expected. The Eco map is economy first: 239bhp and 343Nm. Both still sit above the standard 214bhp and 281Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More MINI John Cooper Works figures
Other petrol variants
All petrol John Cooper Works (R56) variants · John Cooper Works (R56) 2006-2013 overview · All MINI figures