Mercedes-Benz Trucks Axor 2001-2013 2633 326bhp remap figures
The Mercedes-Benz Trucks Axor 2633 326bhp (2001-2013) is a diesel 7.2L model making 326bhp and 1300Nm as standard. After a Stage 1 ECU remap we expect 381bhp and 1501Nm - up to 55bhp and 201Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 326 bhp | 381 bhp | +55 bhp |
| Torque | 1300 Nm | 1501 Nm | +201 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 326 bhp | 1300 Nm | |
| Stage 1Maximum software-only performance | 381 bhp | 1501 Nm | +55 bhp +201 Nm |
| Stage 1 EcoPerformance with economy in mind | 367 bhp | 1485 Nm | +41 bhp +185 Nm |
| Eco mapEconomy first | 363 bhp | 1475 Nm | +37 bhp +175 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Axor
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Temic unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mercedes-Benz Trucks Axor 2633 326bhp?
We expect 381bhp and 1501Nm against 326bhp and 1300Nm as standard: up to +55bhp and +201Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mercedes-Benz Trucks Axor 2633 326bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 367bhp and 1485Nm expected. The Eco map is economy first: 363bhp and 1475Nm. Both still sit above the standard 326bhp and 1300Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mercedes-Benz Trucks Axor figures
Other diesel variants
- 1833 326bhp 2001-2013
- 2533 326bhp 2001-2013
- 1835 353bhp 2001-2013
- 2535 354bhp 2004-2013
- 1836 360bhp 2001-2013
- 2536 360bhp 2001-2013
- 1829 286bhp 2004-2013
- 2529 286bhp 2001-2013
- 2629 286bhp 2001-2013
- 1828 279bhp 2001-2004
All diesel Axor variants · Axor 2001-2013 overview · All Mercedes-Benz Trucks figures