Mazda 2 (DE) 2007> 1.5 100bhp remap figures
The Mazda 2 1.5 100bhp (2007>) is a petrol 1.5L model making 100bhp and 133Nm as standard. After a Stage 1 ECU remap we expect 113bhp and 149Nm - up to 13bhp and 16Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 100 bhp | 113 bhp | +13 bhp |
| Torque | 133 Nm | 149 Nm | +16 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 100 bhp | 133 Nm | |
| Stage 1Maximum software-only performance | 113 bhp | 149 Nm | +13 bhp +16 Nm |
| Stage 1 EcoPerformance with economy in mind | 110 bhp | 148 Nm | +10 bhp +15 Nm |
| Eco mapEconomy first | 109 bhp | 147 Nm | +9 bhp +14 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your 2
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Denso engine control unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Mazda 2 1.5 100bhp?
We expect 113bhp and 149Nm against 100bhp and 133Nm as standard: up to +13bhp and +16Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Mazda 2 1.5 100bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 110bhp and 148Nm expected. The Eco map is economy first: 109bhp and 147Nm. Both still sit above the standard 100bhp and 133Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Mazda 2 figures
Other petrol variants
All petrol 2 (DE) variants · 2 (DE) 2007> overview · All Mazda figures