Massey Ferguson MF5600 2009> 5610 105bhp remap figures
The Massey Ferguson MF5600 5610 105bhp (2009>) is a diesel 3.3L model making 105bhp and 414Nm as standard. After a Stage 1 ECU remap we expect 140bhp and 486Nm - up to 35bhp and 72Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 105 bhp | 140 bhp | +35 bhp |
| Torque | 414 Nm | 486 Nm | +72 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 105 bhp | 414 Nm | |
| Stage 1Maximum software-only performance | 140 bhp | 486 Nm | +35 bhp +72 Nm |
| Stage 1 EcoPerformance with economy in mind | 131 bhp | 480 Nm | +26 bhp +66 Nm |
| Eco mapEconomy first | 128 bhp | 477 Nm | +23 bhp +63 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your MF5600
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
The ECU recorded for this variant is a Bosch EDC17CV44. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Massey Ferguson MF5600 5610 105bhp?
We expect 140bhp and 486Nm against 105bhp and 414Nm as standard: up to +35bhp and +72Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Massey Ferguson MF5600 5610 105bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 131bhp and 480Nm expected. The Eco map is economy first: 128bhp and 477Nm. Both still sit above the standard 105bhp and 414Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Massey Ferguson MF5600 figures
Other diesel variants
All diesel MF5600 variants · MF5600 2009> overview · All Massey Ferguson figures