Maserati Levante 2017> 3.0T V6 345bhp remap figures
The Maserati Levante 3.0T V6 345bhp (2017>) is a petrol 3.0L model making 345bhp and 500Nm as standard. After a Stage 1 ECU remap we expect 440bhp and 602Nm - up to 95bhp and 102Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 345 bhp | 440 bhp | +95 bhp |
| Torque | 500 Nm | 602 Nm | +102 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 345 bhp | 500 Nm | |
| Stage 1Maximum software-only performance | 440 bhp | 602 Nm | +95 bhp +102 Nm |
| Stage 1 EcoPerformance with economy in mind | 416 bhp | 594 Nm | +71 bhp +94 Nm |
| Eco mapEconomy first | 409 bhp | 589 Nm | +64 bhp +89 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Levante
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
This car is listed with a Bosch MED17.3.5 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Maserati Levante 3.0T V6 345bhp?
We expect 440bhp and 602Nm against 345bhp and 500Nm as standard: up to +95bhp and +102Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Maserati Levante 3.0T V6 345bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 416bhp and 594Nm expected. The Eco map is economy first: 409bhp and 589Nm. Both still sit above the standard 345bhp and 500Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Maserati Levante figures
Other petrol variants
All petrol Levante variants · Levante 2016> overview · All Maserati figures