MAN TGX 2007> 10.5 ltr D2066 320bhp remap figures
Thinking of remapping a MAN TGX 10.5 ltr D2066 320bhp? The standard car makes 320bhp and 1600Nm; with a Stage 1 remap from our Leicester workshop we expect around 385bhp and 1822Nm, up to +65bhp and +222Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 320 bhp | 385 bhp | +65 bhp |
| Torque | 1600 Nm | 1822 Nm | +222 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 320 bhp | 1600 Nm | |
| Stage 1Maximum software-only performance | 385 bhp | 1822 Nm | +65 bhp +222 Nm |
| Stage 1 EcoPerformance with economy in mind | 369 bhp | 1804 Nm | +49 bhp +204 Nm |
| Eco mapEconomy first | 364 bhp | 1793 Nm | +44 bhp +193 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your TGX
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC7+/C32 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the MAN TGX 10.5 ltr D2066 320bhp?
We expect 385bhp and 1822Nm against 320bhp and 1600Nm as standard: up to +65bhp and +222Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the MAN TGX 10.5 ltr D2066 320bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 369bhp and 1804Nm expected. The Eco map is economy first: 364bhp and 1793Nm. Both still sit above the standard 320bhp and 1600Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More MAN TGX figures
Other diesel variants
- 10.5 ltr D2066 360bhp 2007>
- 10.5 ltr D2066 400bhp 2007>
- 10.5 ltr D2066 430bhp 2007>
- 10.5 ltr D2066 440bhp 2007>
- 10.5 ltr D2066 460bhp 2007>
- 12.4 ltr D2676 480bhp 2007>
- 12.4 ltr D2676 540bhp 2007>
- 16.2 ltr D2868 680bhp 2007>
All diesel TGX variants · TGX 2007> overview · All MAN figures