MAN TGA 2004> 12.8 ltr D2876 530bhp remap figures
Thinking of remapping a MAN TGA 12.8 ltr D2876 530bhp? The standard car makes 530bhp and 2400Nm; with a Stage 1 remap from our Leicester workshop we expect around 595bhp and 2676Nm, up to +65bhp and +276Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 530 bhp | 595 bhp | +65 bhp |
| Torque | 2400 Nm | 2676 Nm | +276 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 530 bhp | 2400 Nm | |
| Stage 1Maximum software-only performance | 595 bhp | 2676 Nm | +65 bhp +276 Nm |
| Stage 1 EcoPerformance with economy in mind | 579 bhp | 2654 Nm | +49 bhp +254 Nm |
| Eco mapEconomy first | 574 bhp | 2640 Nm | +44 bhp +240 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your TGA
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
Engine management is by a Bosch EDC7/C unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the MAN TGA 12.8 ltr D2876 530bhp?
We expect 595bhp and 2676Nm against 530bhp and 2400Nm as standard: up to +65bhp and +276Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the MAN TGA 12.8 ltr D2876 530bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 579bhp and 2654Nm expected. The Eco map is economy first: 574bhp and 2640Nm. Both still sit above the standard 530bhp and 2400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More MAN TGA figures
Other diesel variants
- 12.8 ltr D2876 480bhp 2004>
- 10.5 ltr D2066 440bhp 2004>
- 10.5 ltr D2066 430bhp 2004>
- 10.5 ltr D2066 400bhp 2004>
- 18.3 ltr D2840 660bhp 2004>
- 10.5 ltr D2066 390bhp 2004>
- 10.5 ltr D2066 360bhp 2004>
- 10.5 ltr D2066 350bhp 2004>
- 10.5 ltr D2066 320bhp 2004>
All diesel TGA variants · TGA 2004> overview · All MAN figures