Land Rover Range Rover Velar (L560) 2021> 3.0 D250 MHEV 247bhp remap figures
Thinking of remapping a Land Rover Range Rover Velar 3.0 D250 MHEV 247bhp? The standard car makes 247bhp and 569Nm; with a Stage 1 remap from our Leicester workshop we expect around 333bhp and 714Nm, up to +86bhp and +145Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 247 bhp | 333 bhp | +86 bhp |
| Torque | 569 Nm | 714 Nm | +145 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 247 bhp | 569 Nm | |
| Stage 1Maximum software-only performance | 333 bhp | 714 Nm | +86 bhp +145 Nm |
| Stage 1 EcoPerformance with economy in mind | 312 bhp | 702 Nm | +65 bhp +133 Nm |
| Eco mapEconomy first | 305 bhp | 695 Nm | +58 bhp +126 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Range Rover Velar
Diesel remaps work mainly on boost pressure, fuel delivery and torque limiters, which is why the Nm gain is usually the figure you feel in everyday driving, particularly when overtaking or towing.
This car is listed with a Bosch MD1CP007 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Land Rover Range Rover Velar 3.0 D250 MHEV 247bhp?
We expect 333bhp and 714Nm against 247bhp and 569Nm as standard: up to +86bhp and +145Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Land Rover Range Rover Velar 3.0 D250 MHEV 247bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 312bhp and 702Nm expected. The Eco map is economy first: 305bhp and 695Nm. Both still sit above the standard 247bhp and 569Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Land Rover Range Rover Velar figures
Other diesel variants
All diesel Range Rover Velar (L560) variants · Range Rover Velar (L560) 2017> overview · All Land Rover figures