Kia Stonic 2017-2018 1.6 CRDi 108bhp remap figures
Stock, this 2017-2018 Kia Stonic diesel (1.6L) produces 108bhp and 260Nm. Our expected figures for a Stage 1 remap are 170bhp and 341Nm, an expected gain of up to 62bhp and 81Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 108 bhp | 170 bhp | +62 bhp |
| Torque | 260 Nm | 341 Nm | +81 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 108 bhp | 260 Nm | |
| Stage 1Maximum software-only performance | 170 bhp | 341 Nm | +62 bhp +81 Nm |
| Stage 1 EcoPerformance with economy in mind | 155 bhp | 335 Nm | +47 bhp +75 Nm |
| Eco mapEconomy first | 150 bhp | 330 Nm | +42 bhp +70 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Stonic
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
Engine management is by a Bosch EDC17C57 unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Kia Stonic 1.6 CRDi 108bhp?
We expect 170bhp and 341Nm against 108bhp and 260Nm as standard: up to +62bhp and +81Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Kia Stonic 1.6 CRDi 108bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 155bhp and 335Nm expected. The Eco map is economy first: 150bhp and 330Nm. Both still sit above the standard 108bhp and 260Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Kia Stonic figures
Other diesel variants
All diesel Stonic variants · Stonic 2017> overview · All Kia figures