Kia Rio 2017> 1.0 T-GDI 99bhp remap figures
The Kia Rio 1.0 T-GDI 99bhp (2017>) is a petrol 1.0L model making 99bhp and 171Nm as standard. After a Stage 1 ECU remap we expect 145bhp and 215Nm - up to 46bhp and 44Nm more than stock.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 99 bhp | 145 bhp | +46 bhp |
| Torque | 171 Nm | 215 Nm | +44 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 99 bhp | 171 Nm | |
| Stage 1Maximum software-only performance | 145 bhp | 215 Nm | +46 bhp +44 Nm |
| Stage 1 EcoPerformance with economy in mind | 134 bhp | 211 Nm | +35 bhp +40 Nm |
| Eco mapEconomy first | 130 bhp | 209 Nm | +31 bhp +38 Nm |
Who is the Stage 1 map for?
- Drivers who want a noticeably quicker car from a software-only change, with no new parts.
- Daily drivers who want stronger mid-range pull and a sharper throttle.
- Anyone who wants the biggest gain we list without fitting hardware.
What this means for your Rio
Turbocharged petrol engines respond well to calibration changes: boost and timing are the main levers, and the result is a flatter, stronger torque curve as well as a higher peak.
The ECU recorded for this variant is a Kefico CPEGD2.20. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Kia Rio 1.0 T-GDI 99bhp?
We expect 145bhp and 215Nm against 99bhp and 171Nm as standard: up to +46bhp and +44Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Kia Rio 1.0 T-GDI 99bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 134bhp and 211Nm expected. The Eco map is economy first: 130bhp and 209Nm. Both still sit above the standard 99bhp and 171Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Kia Rio figures
Other petrol variants
All petrol Rio variants · Rio 2017> overview · All Kia figures