Kia Proceed 2018> 1.6 CRDi (manual) 134bhp remap figures
Stock, this 2018> Kia Proceed diesel (1.6L) produces 134bhp and 281Nm. Our expected figures for a Stage 1 remap are 170bhp and 337Nm, an expected gain of up to 36bhp and 56Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 134 bhp | 170 bhp | +36 bhp |
| Torque | 281 Nm | 337 Nm | +56 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 134 bhp | 281 Nm | |
| Stage 1Maximum software-only performance | 170 bhp | 337 Nm | +36 bhp +56 Nm |
| Stage 1 EcoPerformance with economy in mind | 161 bhp | 333 Nm | +27 bhp +52 Nm |
| Eco mapEconomy first | 158 bhp | 330 Nm | +24 bhp +49 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Proceed
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Continental SIM2K-305 engine control unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Kia Proceed 1.6 CRDi (manual) 134bhp?
We expect 170bhp and 337Nm against 134bhp and 281Nm as standard: up to +36bhp and +56Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Kia Proceed 1.6 CRDi (manual) 134bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 161bhp and 333Nm expected. The Eco map is economy first: 158bhp and 330Nm. Both still sit above the standard 134bhp and 281Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Kia Proceed figures
Other diesel variants
All diesel Proceed variants · Proceed 2018> overview · All Kia figures