Kia Proceed 2013> 1.6 GDi 133bhp remap figures
Thinking of remapping a Kia Proceed 1.6 GDi 133bhp? The standard car makes 133bhp and 164Nm; with a Stage 1 remap from our Leicester workshop we expect around 148bhp and 185Nm, up to +15bhp and +21Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 133 bhp | 148 bhp | +15 bhp |
| Torque | 164 Nm | 185 Nm | +21 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 133 bhp | 164 Nm | |
| Stage 1Maximum software-only performance | 148 bhp | 185 Nm | +15 bhp +21 Nm |
| Stage 1 EcoPerformance with economy in mind | 144 bhp | 183 Nm | +11 bhp +19 Nm |
| Eco mapEconomy first | 143 bhp | 182 Nm | +10 bhp +18 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Proceed
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Bosch ME17.9.11 unit. We read the ECU on your car and compare it with the software listed here before any work starts, so you know what to expect before you commit.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Kia Proceed 1.6 GDi 133bhp?
We expect 148bhp and 185Nm against 133bhp and 164Nm as standard: up to +15bhp and +21Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Kia Proceed 1.6 GDi 133bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 144bhp and 183Nm expected. The Eco map is economy first: 143bhp and 182Nm. Both still sit above the standard 133bhp and 164Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Kia Proceed figures
Other petrol variants
- 1.0T GDi 118bhp 2015>
- 1.0T GDi 98bhp 2015>
- 1.4 SR7 98bhp 2015>
- 1.4 VR7 98bhp 2014>
- 1.6T GDi GT 201bhp 2013>
All petrol Proceed variants · Proceed 2013-2018 overview · All Kia figures