Jeep Renegade 2015> 1.4 Multiair 167bhp remap figures
Thinking of remapping a Jeep Renegade 1.4 Multiair 167bhp? The standard car makes 167bhp and 250Nm; with a Stage 1 remap from our Leicester workshop we expect around 205bhp and 303Nm, up to +38bhp and +53Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 167 bhp | 205 bhp | +38 bhp |
| Torque | 250 Nm | 303 Nm | +53 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 167 bhp | 250 Nm | |
| Stage 1Maximum software-only performance | 205 bhp | 303 Nm | +38 bhp +53 Nm |
| Stage 1 EcoPerformance with economy in mind | 196 bhp | 299 Nm | +29 bhp +49 Nm |
| Eco mapEconomy first | 192 bhp | 296 Nm | +25 bhp +46 Nm |
Who is the Stage 1 map for?
- Drivers who want a sharper throttle and a small, honest gain from software alone.
- Owners who would rather keep the car standard in every other way.
- Anyone who wants the fullest software-only map for this engine, accepting that the gain is modest without a turbocharger.
What this means for your Renegade
Without a turbocharger the improvement comes from ignition, fuelling and throttle mapping rather than boost, so expect a smaller but still noticeable change in response.
Engine management is by a Marelli 8GMK unit. Newer ECUs often protect their software, so we read the exact unit and version on the car before confirming the figures on this page.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Jeep Renegade 1.4 Multiair 167bhp?
We expect 205bhp and 303Nm against 167bhp and 250Nm as standard: up to +38bhp and +53Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Jeep Renegade 1.4 Multiair 167bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 196bhp and 299Nm expected. The Eco map is economy first: 192bhp and 296Nm. Both still sit above the standard 167bhp and 250Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Jeep Renegade figures
Other petrol variants
All petrol Renegade variants · Renegade 2015> overview · All Jeep figures