Jeep Cherokee (KJ) 2001-2007 2.8 CRD 161bhp remap figures
Stock, this 2001-2007 Jeep Cherokee diesel (2.8L) produces 161bhp and 400Nm. Our expected figures for a Stage 1 remap are 205bhp and 466Nm, an expected gain of up to 44bhp and 66Nm.
Choose your map
Stage 1 remap figures
A Stage 1 remap is a software-only change to the ECU on an otherwise standard car. It needs no extra parts, which makes it the usual starting point.
| Stock | Vanguard expected | Expected gain, up to | |
|---|---|---|---|
| Power | 161 bhp | 205 bhp | +44 bhp |
| Torque | 400 Nm | 466 Nm | +66 Nm |
All maps at a glance
| Map | Power | Torque | Expected gain, up to |
|---|---|---|---|
| Stock | 161 bhp | 400 Nm | |
| Stage 1Maximum software-only performance | 205 bhp | 466 Nm | +44 bhp +66 Nm |
| Stage 1 EcoPerformance with economy in mind | 194 bhp | 461 Nm | +33 bhp +61 Nm |
| Eco mapEconomy first | 190 bhp | 457 Nm | +29 bhp +57 Nm |
Who is the Stage 1 map for?
- Drivers who want stronger pulling power for overtaking, hills and towing, with no parts to fit.
- Daily and motorway drivers who want the engine to feel less strained at cruising speed.
- Anyone who wants the biggest software-only change we list for this engine.
What this means for your Cherokee
On a diesel the biggest change is normally torque: the remap changes how much fuel and boost the ECU allows across the rev range, so pulling power arrives earlier and holds on longer.
This car is listed with a Bosch EDC16C2 engine control unit. Older engine management is simpler to work with, but age matters: worn sensors, leaks and tired components can hold back what a remap delivers, which is why we run a diagnostic check first.
We remap at our Belgrave Gate workshop in Leicester, or at your home or work within 30 miles, and every job starts with a diagnostic check.
Please note: these are expected figures, not guarantees. Real results vary with the condition of the vehicle, the ECU software version, fuel quality and the hardware fitted. Some options - including Stage 2 and anything that needs extra hardware - are for off-road or competition use only. We check every vehicle first and confirm what is achievable before any work starts.
Figures reviewed 22 October 2026.
Stage 1 questions
How much power does the Stage 1 map give the Jeep Cherokee 2.8 CRD 161bhp?
We expect 205bhp and 466Nm against 161bhp and 400Nm as standard: up to +44bhp and +66Nm. These are expected figures, and we confirm what is achievable on your own car after a diagnostic check.
Does a Stage 1 remap need any extra parts on the Jeep Cherokee 2.8 CRD 161bhp?
No. Stage 1 is a software-only change to the ECU on an otherwise standard car.
Is there a gentler map than Stage 1 for this engine?
Yes, two. Stage 1 Eco is performance with economy in mind: 194bhp and 461Nm expected. The Eco map is economy first: 190bhp and 457Nm. Both still sit above the standard 161bhp and 400Nm.
Do I need to tell my insurer about a remap?
Yes. A remap is a modification, so you should declare it to your insurer.
More Jeep Cherokee figures
Other diesel variants
All diesel Cherokee (KJ) variants · Cherokee (KJ) 2001-2007 overview · All Jeep figures